NICREW Slim Manual De Instrucciones página 5

English
Installa�on Guide
IMPORTANT: DO NOT OPERATE FILTER WITHOUT WATER.
1. Assemble the intake tube as shown. (fig.1)
2. Insert intake tube and filter cartridge. Make sure the control valve is firmly
installed and adjust it to maximum flow. (fig.2)
max. flow
fig.1 fig.2
This side up!
3. Hang filter onto rim of aquarium and level the filter using the levelling knob.
Fill chamber COMPLETELY with water to prime filter. (fig.3)
fig.3
≤ 1'' (2.5 cm)
water level
NOTE: The minimum water level in the tank should be no more than 1 inch
(2.5 cm) below the aquarium rim.