Publicidad
Idiomas disponibles
Idiomas disponibles
OPERATION
1. Installation Procedures
1. As shown in the figure, place the toilet seat ① upside down on a flat surface
(you can see the raised inner circle in the middle of the seat and the front raised
part).
Raised inner
Front raised
2. As shown in the figure, insert the two clamps ② through the threaded guide
slots on each side of the bottom of the seat, and press down firmly on the
clamps to rotate the bracket knobs clockwise (note: the clamps should not be
locked all the way to the bottom, otherwise the seat may not be placed properly
on the toilet).
4
Publicidad
