VTech RM2751 Guia De Inicio Rapido página 8

Download app for mobile access
1
App installation
a) From parent unit
• Before installing the app, please connect your baby monitor to your Wi-Fi network.
Press on the parent unit, go to
1. Press when the parent unit is idle.
2. Go to > > Connect Mobile Phone.
3. Scan the QR code in the parent unit to download the app into your mobile
device.
b) From app store
1. Browse the App Store or the Google Play store
2. Search for the mobile app with the keyword "myvtech baby pro".
3. Download and install the MyVTech Baby Pro mobile app to your mobile device.
OR
Scan the QR code on the right to get the app.
• Make sure your mobile device meets the minimum
requirement for the mobile app.
Minimum requirement
The mobile app is compatible with:
• Android 6.0 or later; and
TM
• iOS 12 or later.
2
Set up user account
In your mobile device:
1. Tap to run the mobile app, and then create a user account.
2. We recommend that you use common webmail services, such as Google
Gmail for registration of your user account. Check your email (and Spam
folder), and activate your new camera account via the email link, then sign in
to your account.
3
Add camera
Follow the instructions in the mobile app to pair the camera.
> .
.
14
How the system works
For better security and more stable connectivity, this baby monitor requires
connecting to a 2.4GHz home Wi-Fi network and operating in Router mode
connection. To set up Router mode, go to
Direct mode
Your baby monitor parent unit and baby unit connect to each other in Direct mode by default,
which allows you to immediately stream video out of the box.
It is NOT recommended to continue using Direct Mode connection after initial installation
Local access, for
Local access
start up quick view
and setup stage.
Router mode
You are required to set up your monitor
in Router mode to enjoy live video
streaming via your parent unit with an
enhanced connection. Router mode
is the recommended mode for stable
connectivity.
Router mode uses your 2.4GHz home
Wi-Fi network to connect your video
monitor. It supports live video streaming
through the parent unit and smartphone
app.
If you want to stream live video remotely
with your mobile device, download
and install the MyVTech Baby Pro mobile app. With the mobile app, your Wi-Fi router (not
included) provides Internet connectivity to your HD video monitor system. It serves as a
communicating channel between your baby unit and mobile device, allowing you to monitor
and/or control your baby unit wherever you are. For more details, see Download app for
mobile access section in this quick start guide
Note
• When both parent unit and app are viewing the camera simultaneously, the video quality will be
optimised to deliver the best possible viewing result.
/
> .
You may experience reduced signal
strength if your parent unit and baby
unit are far apart, or there are
obstructing factors, such as internal
walls, between them. You have to set
up Router mode to connect the units
via your home Wi-Fi network to
improve the connection between
your parent unit and baby unit.
Enhanced local access
Mobile access
.
15
.