Descargar Imprimir esta página

Lorex Aurora Serie Guía Configuración Rápida página 2

Ocultar thumbs Ver también para Aurora Serie:

Publicidad

EN - Safety Precautions
Follow all instructions for safe use and handling of the product.
Use the camera within given temperature, humidity and voltage levels noted in the camera specifications.
Do not disassemble the camera.
Do not point the camera directly at the sun or a source of intense light.
You may need to clean periodically using a damp cloth. Do not use harsh, chemical-based cleaners.
The supplied cable is rated for surface mounting only (Non-UL). Cables for in-wall and floor-to-floor installations
are sold separately (CMR type). These and other cables are available at lorex.com.
It is recommended to connect the camera to the NVR or an external PoE switch. If using a power adapter with this
camera, a REGULATED power supply is REQUIRED (not included). Use of a non-regulated, non-conforming power
supply can damage this product and voids the warranty.
Disclaimers
Use the camera only with compatible Lorex recorders. For a full list, visit lorex.com/compatibility.
Not intended for submersion in water. Installation in a sheltered location recommended.
The camera includes an Auto Mechanical IR Cut Filter. When the camera changes between Day/Night viewing
modes, an audible clicking noise may be heard from the camera. This clicking is normal, and indicates that the
camera filter is working.
Audio recording and/or face recording without consent is illegal in certain jurisdictions. Lorex Corporation
assumes no liability for use of its products that do not conform with local laws.

Publicidad

loading

Este manual también es adecuado para:

Aurora a4 lnb45abbAurora a4 lnb45abw