VERTICAL STEAM IRON
PARTS OF THE APPLIANCE.
FILLING OF WATER
- Use only distilled water.
- Open the water tank cap and fill up to the "Max" sign.
- Never exceed the maximum water signal.
- Close the tank cap.
- Never fill with water with the appliance plugged into the mains.
INSTRUCTIONS MANUAL
TH - VI201
A. BASE
B. FLAT BRUSH.
C. UPHOLSTERY BRUSH.
D. RUBBER PROTECTOR.
E. SOLE.
F. LOWER HOUSING.
G. INTERMEDIUM HOUSING.
H. UPPER CASE.
I. EMBELLISHER.
J. WATER TANK.
K. WATER ENTRY.
L. SELECTOR OF
TEMPERATURE.
M. INDICATOR OF
HEATING.
N. CABLE PROTECTOR.
O. BLOW BUTTON
STEAM.
P. ACCESSORIES BUTTON.
WARNINGS.
- Check that the electric current matches that of the appliance.
- Never leave the appliance plugged in unused or unattended.
- This appliance can be used by children 8 years of age and older and by
persons with reduced physical, sensory or mental persons with reduced
physical, sensory or mental capabilities or lack of experience and
knowledge, if they are lack of experience and knowledge, if they have been
given supervision or instruction concerning use of the appliance in a safe
and instruction concerning use of the appliance in a safe way and
understand the hazards involved.
- This device is not suitable for use by children, it is not a game for children.
- Never use the device where water or liquids may get wet or splashed.
- Do not use this appliance in bathtubs, showers or tanks filled with water.
- Do not use the appliance near water or any other liquid.
- Water or any other liquid must not be splashed on this appliance.
- Never try to repair the appliance yourself.
- If the cable is damaged, contact the official technical service.
- If you notice any anomaly, contact the official technical service.
- The support must be placed on horizontal, smooth and flat surfaces.
- Keep the cable away from the sole of the iron.
- Always use distilled water.
- After using, set the temperature selector to the minimum and unplug.
- Wait for the appliance to cool completely before storing.
- You can iron in horizontal and vertical position.
- In the case of vertical ironing, never exceed the vertical position of 90 ºC.
- In case of horizontal ironing, never iron under mouth.
OPERATING
- Set the temperature selector to the minimum before plugging.
- Put the accessory brush necessary according to the fabric to be ironed.
- Plug in the current and select the desired temperature.
- Wait until the heating light goes out and it will be ready.
- For optimum steam, select the maximum temperature.
- For steam blows with force, select maximum temperature.
- Every 3 strokes of steam followed, wait for it to warm up again.
- After using, unplug and let cool completely.
- For dry ironing, simply empty the water from the tank.