Publicidad
Idiomas disponibles
Idiomas disponibles
EN
product or these instructions to operate the
product. products are dangerous in the hands of
untrained users.
• Maintain products and accessories. Check for
misalignment or binding of moving parts,
breakage of parts and any other condition
that may affect the product's operation. If
damaged, have the product repaired before use.
Many accidents are caused by poorly maintained
products.
• Keep cutting tools sharp and clean. Properly
maintained cutting tools with sharp cutting edges
are less likely to bind and are easier to control.
• Use the product, accessories, and tool bits etc.
in accordance with these instructions, taking
into account the working conditions and the
work to be performed. Use of the product for
operations different from those intended could result
in a hazardous situation.
• Keep handles and grasping surfaces dry, clean,
and free from oil and grease. Slippery handles
and grasping surfaces do not allow for safe handling
and control of the tool in unexpected situations.
2.2.5
BATTERY TOOL USE AND CARE
• Recharge only with the charger specified by the
manufacturer. A charger that is suitable for one
type of battery may create a risk of fire when used
with another battery.
• Use machines only with specifically designated
batteries. Use of any other batteries may create a
risk of injury and fire.
• When battery is not in use, keep it away from
other metal objects, like paper clips, coins, keys,
nails, screws, or other small metal objects, that
can make a connection from one terminal to
another. Shorting the battery terminals together
may cause burns or a fire.
• Under abusive conditions, liquid may be ejected
from the battery; avoid contact. If contact
accidentally occurs, flush with water. If liquid
contacts eyes, additionally seek medical help.
Liquid ejected from the battery may cause irritation
or burns.
• Do not use a battery or product that is damaged
or modified. Damaged or modified batteries may
exhibit unpredictable behavior resulting in fire,
explosion, or risk of injury.
• Do not expose a battery or product to fire
or excessive temperature. Exposure to fire or
temperature above 130 °C (265 °F) may cause
explosion.
• Follow all charging instructions and do not
charge the battery or product outside the
temperature range specified in the instructions.
Charging improperly or at temperatures outside
the specified range may damage the battery and
increase the risk of fire.
English
2.2.6
SERVICE
• Have your product serviced by a qualified repair
person using only identical replacement parts.
This will ensure that the safety of the product is
maintained.
• Never service damaged batteries. Service of
batteries should only be performed by the
manufacturer or authorized service providers.
2.2.7
HEDGE TRIMMER SAFETY WARNINGS
• Do not use the hedge trimmer in bad weather
conditions, especially when there is a risk of
lightning. This decreases the risk of being struck
by lightning.
• Keep all power cords and cables away from
cutting area. Power cords or cables may be hidden
in hedges or bushes and can be accidentally cut by
the blade.
• Wear ear protection. Adequate protective
equipment will reduce the risk of hearing loss.
• Hold the hedge trimmer by insulated gripping
surfaces only, because the blade may contact
hidden wiring. Blades contacting a "live" wire may
make exposed metal parts of the hedge trimmer
"live" and could give the operator an electric shock.
• Keep all parts of the body away from the blade.
Do not remove cut material or hold material to
be cut when blades are moving. Blades continue
to move after the switch is turned off. A moment of
inattention while operating the hedge trimmer may
result in serious personal injury.
• When clearing jammed material or servicing
the hedge trimmer, make sure all power
switches are off and the battery is removed or
disconnected. Unexpected actuation of the hedge
trimmer while clearing jammed material or servicing
may result in serious personal injury.
• Carry the hedge trimmer by the handle with the
blade stopped and taking care not to operate
any power switch. Proper carrying of the hedge
trimmer will decrease the risk of inadvertent starting
and resultant personal injury from the blades.
• When transporting or storing the hedge trimmer,
always use the blade cover. Proper handling of
the hedge trimmer will decrease the risk of personal
injury from the blades.
2.2.8
EXTENDED-REACH HEDGE TRIMMER
SAFETY WARNINGS
• Always use head protection when operating the
pole hedge trimmer overhead. Falling debris can
result in serious personal injury.
• Always use two hands when operating the pole
hedge trimmer. Hold the pole hedge trimmer with
both hands to avoid loss of control.
6
Publicidad
