4. Always be sure you have a firm footing. Be sure no one is below when using the tool in high locations.
5. Hold the tool firmly.
6. Keep hands away from rotating parts.
7. Do not leave the tool running. Operate the tool only when hand-held.
8. Do not touch the drill bit or the work piece Immediately after operation; they may be extremely hot and could burn your
skin.
9. Some material contains chemicals which may be toxic. Take caution to prevent dust Inhalation and skin contact. Follow
material supplier safety data.
SAVE THESE INSTRUCTIONS.
WARNING:
DO NOT let comfort or familiar ty with product (gained from repeated use) replace strict adherence to safety rules for the
subject product. MISUSE or failure to follow the safety rules stated in this instruction manual may cause serious personal
injury.
Symbols
The followings show the symbols used for tool.
IMPORTANT SAFETY INSTRUCTIONS
FOR BATTERY CARTRIDGE
1. Before using battery cartridge, read all Instructions and cautionary markings on (1) battery charger, (2) battery, and (3)
product using battery.
2. Do not disassemble battery cartridge.
3. If operating time has become excessively shorter, stop operating Immediately. It may result In a risk of overheating,
possible burns and even an explosion.
4. If electrolyte gets into your eyes, rinse them out with clear water and seek medical attention right away. It may result in loss
of your eyesight.
volts
V
direct current
no load speed
n
o
revolutions or reciprocation per minute
... / min
r / mln r
3
YEAR
1
WARRANTY