Publicidad
Idiomas disponibles
Idiomas disponibles
Modello - Modèle - Model
Modell - Modelo - Modelo
Fabbricante - Constructeur - Manufacturer
Hersteller - Fabricante - Fabricante
User manual
9.8
Use of cabinet
IT
Lighting
FR
Cabinet lighting is controlled by a switch on the
rear of the cabinet.
EN
EN
Thermometer
The thermometer located on the air inlet
DE
displays the temperature inside the display
case.
ES
Telethermostat
The telethermostat on the rear displays control
PT
and operation temperature.
Configuration of the display shelves
To ensure the correct performance that the
cabinet was designed for, shelves must be
arranged inside the cabinet according to the
set-up described below. (chart "Chart III" to pg.
"21").
N°DOC. UM000484 REV. "E" - 14/12/23
KALEIDO
Epta Spa - Via Mecenate, 86 - 20138 Milano (MI) ITALIA
Tel. 02/55403211 Telefax 02/55401023
9.9
Cleaning and ordinary
maintenance
Good visibility in the intervention area is
recommended, possibly using an additional
light source.
Cleaning the cabinet
Only use water at a maximum temperature of
65°C and household soap or neutral detergent
diluted in water.
Never use:
• Abrasive sponges
• Flammable or abrasive products such as
alcohol, acetone or solvents
• Detergents
surfactants, lemon or vinegar (acetic acid)
F
Do not wash or clean the top part of the
cabinet with water or liquids.
Clean all the external parts of the cabinet ONCE
A WEEK.
Clean all the internal parts of the cabinet ONCE
A MONTH, following the instructions below:
• Disconnect the power supply to the cabinet
using the wall-mounted main switch-
disconnector ("Fig. 48").
• Empty the cabinet, storing the goods in
cold rooms or refrigerators to maintain the
preservation temperature.
• Wait for the inside of the cabinet to have
reached the ambient temperature and
then clean
• After carefully checking that the inside of
the cabinet is completely dry, restart the
appliance by re-energising the cabinet.
• After a couple of hours, load the goods
again.
24/29
that
contain
non-ionic
Publicidad
