Parkside PRFMA 20-Li A1 Instrucciones De Funcionamiento página 35

3. Connect your external Bluetooth
bled device to the radio. Select "PRF-
MA 20-Li A1" from the list.
4. As soon as the device is connected, a
beep sounds and the display (2) shows
"Connected".
5. Playback can only be started on the
Bluetooth playback device.
Pausing/continuing playback
When playing via Bluetooth
MUTE button is the
button.
The device switches off automatically if
you pause playback via Bluetooth for more
than 5 minutes.
Pausing playback
1. Press the MUTE button (13) during
playback.
Continuing playback
2. Press the MUTE button (13).
Selecting tracks
1. Press the NEXT button (11) to jump to
the next track.
2. Press the PREV button (14) once to reset
a running track to the beginning.
Double clicking on the PREV button
(14), during a running title, lets you
jump to the previous title.
Clicking on the PREV button (14),
while the title has not yet started,
lets you jump directly to the previous ti-
tle.
TWS – True Wireless Stereo
With the TWS function you can connect
two identical radios to a stereo speaker
pair via Bluetooth
®
®
®
Play/Pause
.
-ena- 1. Ensure that neither of the devices is
connected to a playback device via
Bluetooth
2. Press the source button (7) repeatedly
until the display (2) shows "Bluetooth".
3. Press the Preset/TWS button (8) once
on each device. The TWS indicator will
flash on the display (2).
4. The devices will connect with one
another and the TWS indicator on
the display (2) of one device will stop
the flashing. „TWS connected" appears in
the display.
5. The device on which the TWS indicator
continues to flash is the master device.
„TWS not connected" appears in the
display. The mobile phone is now con-
nected to this device as described in
the chapter "Operating via Bluetooth
„TWS connected" is now shown in the
display.
6. To cancel the connection between the
two speakers, press the Preset/TWS
button (8) once.
System settings for all
modes
Information on special settings for
the different playback modes can
be found in the relevant chapters.
In Radio mode (FM and AM)
1. Press and hold the Info/Advanced but-
ton (9) for approx. 2 seconds to access
the Settings menu.
2. Scroll to the list entry "System" using
the NEXT / PREV buttons (11/14) or
the volume control knob (3).
3. Push the volume control knob (3) to
confirm the selection.
4. Scroll to the desired entry using the
NEXT / PREV buttons (11/14) or the
volume control knob (3).
GB
.
®
MT
".
®
35