Publicidad
Idiomas disponibles
Idiomas disponibles
6
4
7
10B
9
2
8
3
©
11
13
-10A
.
.
WHEEL GUARD - Covers the grinding wheels and
protects against accidental contact.
WHEEL COVER - Covers the grinding wheels and
provides access for routine maintenance.
3.
MOTOR HOUSING - Contains the electrical motor.
4.
EYESHIELD MOUNTS - Supports the eyeshields.
5.
EYESHIELDS - Protective Lexan see-thru shields
to prevent any loose debris from contacting the
operator.
6.
FLEXIBLE WORK LIGHT - Provides assistance to
the operator for grinding operations.
7.
SPARK ARRESTORS
- Prevents hot sparks and
debris from contacting the operator.
8.
TOOL REST ADJUSTABLE
SUPPORTS - Lets the
operator position the tool rest closer to the wheel as
the wheel decreases in diameter due to wear.
9.
TOOL RESTS - Used to support the workpiece
that is being ground. Adjustable to provide angled
surfaces.
10. A) GRINDING WHEEL 120 GRIT - Used to remove
light material from workpiece.
10. B) GRINDING WHEEL 60 GRIT - Used to remove
heavy material from workpiece.
11. ON / OFF SWITCH - Used to turn "ON" and turn
"OFF" the grinder.
12. WHEEL DRESSER - Used to clean and smooth
surface of the Grinding Wheel (not shown).
13. QUENCH TRAY - Used to cool workpiece after
grinding.
14. MOUNTING PAD - Used to secure the grinder to a
workbench or suitable work surface.
15. GRINDING WHEEL IDENTIFICATION
LABEL -
Provides information on wheel size, grit and maxi-
mum RPM. Must be left on to distribute the load of
tightening the Lock Nuts (not shown).
16. ARBOR BUSHING - Used when wheels have an
oversized wheel bore (not shown).
17. FLANGES - Used to secure the grinding wheels to
the grinder and distribute the load of the Lock Nuts
(not shown).
18. LOCK NUT - Used to secure the grinding wheels to
the grinder (not shown).
Publicidad
