Publicidad
Idiomas disponibles
Idiomas disponibles
− Change the string spindle.
9.9
Work with the metal cutting blade
Attention! During your work always wear the belt and suitable work clothes. Make sure the
cutting blade is properly mounted. Damaged and blunted unit components must be replaced.
There is a risk of injury.
▪
Use the cutting blade on free and flat surfaces. Carefully check all the areas to be
treated and remove all the foreign objects. Avoid any contact with stones, metal or other
obstacles. The metal cutting disk could become damaged and there is also a risk of
kicking.
▪
During your work, hold the cutting attachment close above the ground and move the unit
like a regular scythe from side to side.
▪
Do not hold the cutting attachment under any angle and do not lift it above the ground.
▪
Do not use the unit for the cutting of shrubs, brushwood or underwood.
▪
Regularly check the metal cutting blade's condition and change damaged cutting blades.
10 CLEANING AND MAINTENANCE
ATTENTION! Let any repair and maintenance work not described in these
instructions be carried out by a professional service shop. Only use original
replacement parts. Any maintenance and cleaning tasks should only be
carried out when the motor is switched off and the ignition disconnected.
Risk of injury! Let the machine cool down before undertaking any
maintenance or cleaning tasks. Parts of the motor are hot. There is a risk of
getting burned!
▪
This tool corresponds to the relevant safety provisions.
▪
Repairs, service and maintenance must be carried out exclusively by authorized service
workshops/trained professionals.
▪
Only original spare parts may be used for repairs; otherwise there is a risk of injury for
the operator.
10.1
Unit cleaning
Subject your unit to regular cleaning and care. It will deliver good performance for a very long
time.
▪
After every operation clean the cutting attachment of grass and soil.
▪
Clean the unit with a soft brush or a rug.
▪
The unit must not be sprayed with water or submerged into water.
▪
Do not use any detergents or cleaning solutions. The unit could be damaged. Chemical
substances could negatively affect the unit's plastic components.
Copyright © 2024 VARO
POWEG8013
P a g e
| 9
EN
www.varo.com
Publicidad
