Vacmaster SCA0801 Manual Del Usuario página 7

• Before starting work, the operating staff must be informed on
- use of the carpet cleaner,
- risks associated with the material to be picked up,
- safe disposal of the picked up material.
UNPACKING AND PRODUCT FEATURES
1 Power Button
2 Tool Release Button
3 Hose Storage Clip
4 Suction Hose
5 Dirty Water Tank
6 Dirty Water Tank Cover Release
7 Carry Handle
8 Power Cord
NOTE: A Phillips screwdriver is required.
1. Loosen the pre-attached screw located on the hose storage clip. Secure the hose storage clip onto
the carpet cleaner body with the supplied screw (Fig. 1).
2. Select the preferred attachment and slide it onto the end of the suction hose until it clicks into
place (Fig. 2).
To remove: Press the tool release button and pull away the attachment.
NOTE: Clip the suction hose with the tool attached into the hose storage clip when not in use
(Fig. 3).
3. Wrap the power cord loosely around the quick release cord hooks (Fig. 4).
9 Power Cord Hooks
10 Clean Water Tank
11 Clean Water Inlet Cap
12 Hose Cleaning Tool
13 Tough Stain Nozzle
14 Wide Path Nozzle
15 Carpet Solution
16 Instruction Manual
ASSEMBLY
7
GB