BellaVista 107828 Instrucciones De Montaje página 37

Assembly
• Use a blanket or tarpaulin underneath to
prevent scratches on both the floor and
the item�
• Assemble the product with at least two
people. Take your time during assembly.
• Ensure you have enough space (at least
10 m ) in a quiet area for assembly.
2
• Lay out all the components in front of
you.
• Before assembly, check if all parts are
present in the stated quantity. If any parts
are missing or damaged, contact the
manufacturer immediately.
• If you can't locate certain small parts,
they might be pre-assembled.
• Do not attempt to open sealed or welded
components�
Disassembly
Disassemble in reverse order of assembly.
10 / 2023 107828/107809
We hope you enjoy your
bellavista - Home & Garden® product.
GB
• Once assembly has started or is comple-
ted, claims due to damages or missing
parts cannot be accepted�
• If drill holes do not fit exactly, first do not
tighten the screws or loosen them again�
This gives jammed screws more room to
move� Then tighten all the screws one
after the other�
• Make sure that all screws are tight! The
screw connections can loosen during
use and thus affect the stability of the
product� Therefore, retighten the screws
regularly.
• After assembly, make sure all parts are
correctly in place and functional.
37