BellaVista 107692 Instrucciones De Montaje página 32

Manufacturer and Product Service
Replacement parts are available through our
product service. Retain your purchase receipt.
The product images on the packaging and in the
guide are representative�
Assembly
• Use a blanket or tarpaulin underneath to
prevent scratches on both the floor and
the item�
Assemble the product with at least two
•
people. Take your time during assembly.
• Ensure you have enough space (at least
10 m
2 ) in a quiet area for assembly.
• Lay out all the components in front of
you.
• Before assembly, check if all parts are
present in the stated quantity. If any parts
are missing or damaged, contact the
manufacturer immediately.
• If you can't locate certain small parts,
they might be pre-assembled.
• Do not attempt to open sealed or welded
components�
Disassembly
Disassemble in reverse order of assembly.
32
We hope you enjoy your
bellavista - Home & Garden® product.
GB
Item No.: 107692
Alltrade TOPO GmbH
Eiffestraße 76
D-20537 Hamburg
info@alltrade-topo�de
alltrade-topo�de
• Once assembly has started or is comple-
ted, claims due to damages or missing
parts cannot be accepted�
• If drill holes do not fit exactly, first do not
tighten the screws or loosen them again�
This gives jammed screws more room to
move� Then tighten all the screws one
after the other�
• Make sure that all screws are tight! The
screw connections can loosen during
use and thus affect the stability of the
product� Therefore, retighten the screws
regularly.
• After assembly, make sure all parts are
correctly in place and functional.
107692 10 / 2023