Publicidad
Idiomas disponibles
Idiomas disponibles
EN
WARNINGS AND CAUTIONS
Product pictures and specifications are subject to change without prior notice.
The English version is a translation of the original document in Spanish. In case of a discrepancy, the original will prevail.
EQUIPMENT MISUSE
• This device is for professional use only. Read all instruction manuals, tags, and labels before operating the device.
• The U·Power/ U·Power + device is intended to work as a power supply for the fluid monitoring system equipment.
• Use the device only for its intended purpose
• This device has not been approved for being used in commercial transactions.
• Install and use the device following all local and national regulations including all health, safety and
environmental laws and regulations.
• Do not tamper the device.
• Any unauthorised modification to the device, misuse, improper maintenance or identification label removal may
void the warranty.
• Verify the correct settings of the monitoring system prior to the first use.
• Do not install the device in places with high humidity or near water.
• Do not install this device in places with high ambient temperature or near heat sources.
ELECTRICAL LIMITS
• Do not exceed the permissible electrical ranges of the device. See TECHNICAL SPECIFICATIONS chapter.
• Any device malfunction must be examined by qualified personnel. Do not remove the power supply
housing as there is a risk of damage due to electrical contact.
TECHNICAL SPECIFICATIONS
INPUT
Voltage
Current
Frecuency
OUTPUT
Voltage
Current
Power
Can bus connections
Weight
DIMENSIONS
2
105 286 R. 09/23
Alentec & Orion AB Grustagsvägen 4, SE-13840, Älta, SWEDEN · info@alentec.se · www.alentec.com
115V/230V AV
4A/115V AC - 2A/230V AC
47 - 63 HZ
24VDC
0-13.4 A
320 W
3xCAN BUS 1xIEC 1xBY-PASS KEY
1.9 kg( 4.2 lb)
261 mm (10.3")
137 mm (5.4")
63 mm (2.5")
160 mm (6.3")
148 mm (5.8")
Publicidad
