HOTO Laser Level 3 360 Manual Del Usuario página 10

Power on/off with the movement locked
Power on/off
Power on
1. Under the power-off mode, press and hold the
"Switch/mode button" for 1.5 s to power on the
product with the movement locked.
2. All three laser s are on af ter the produc t is
powere d on, and the las er s c an be powere d
of f or ba ck on by using t h e cont rol b ut tons
corresponding to the lasers.
3. Short press the "Switch/mode button" to switch
the laser full bright mode and pulse mode.
Power off
1. Under the power-on mode, press and hold the "Switch/mode button" for 1.5
s to power off the product with the movement locked. The battery indicator
light is off.
2. When the three laser emitters are turned off via the corresponding laser
control buttons, the power indicator light automatically goes off after two
hours of no operation.
Remark:
1. The product cannot automatically calibrate for leveling when working with
the movement locked.
2. When working with the movement locked, the currently illuminated laser
flashes every 7 s to alert the user to the current non-leveling state.
3. Under the pulse mode, the pulse indicator light is on synchronously, the
laser is a little darker than the full bright mode, and the product can be used
with a laser receiver (supports 10K frequency).
6