Please read all instructions before using this product and keep these safety
instructions for future reference.
Warning
1. Do not use the drying rack until it is fully assembled according to the instructions in this manual.
2. When using the appliance, always observe basic safety precautions to reduce the risk of fire,
electric shocks and injuries.
3. Before plugging in the drying rack, please check that the voltage indicated on the plate matches
the voltage of the local power supply.
4. Children should be kept away from the equipment unless continuously supervised.
5. The equipment is not a toy.
6. In case of failure of the power cord, plug, or any part of the drying rack, or if the drying rack falls
or is damaged, only a qualified electrician should perform the repair.
7. Place the drying rack and its power cord away from heat sources or sharp edges to prevent
damage.
8. Keep the drying rack away from other heat-emitting devices.
9. Do not place the power cord under carpets or in any place that may cause tripping hazards.
10. Do not immerse the drying rack or plug in water or any other liquid.
11. Do not use the drying rack in or around bathtubs, showers, or swimming pools.
12. Do not attempt to move the drying rack while it is in use.
13. Always unplug the drying rack before cleaning or performing maintenance.
14. Make sure the drying rack is completely cooled before and after use, cleaning, or maintenance.
15. Max load: 2.5kg per wing, 10kg per center section
16. For indoor use only.
Features
IP Degree: IP X1
Dimension devise: 170 x 61 x 103 cm
Power: 310 W, Class I
Input: 220-240V AC, 50-60Hz
Instructions
1. Please carefully read the installation instructions to understand how to install and use the product.
2. Ensure the installation is completed.
3. Turn the power switch to the [OFF] position.
4. Insert the power cord into the power outlet.
5. After connecting the power, press the power on/off switch, the power indicator light will turn on,
and the heater will start heating.
11
EN