Q Acoustics FS75 Manual De Instrucciones página 6

Introduction
Thank you for purchasing a pair of Q Acoustics Q FS75 Floor Stands.
This manual is intended to take you through the setup and installation of the Q FS75 Floor Stands. It will help provide a trouble free setup and ensure optimum performance from the product.
Please read the instructions, important safety information and warnings carefully before installation and use, to ensure the safe and satisfactory operation of this product.
Designed to offer unprecedented unity when partnered with the Concept 30 / Q Active 200 Speakers, the stand and speaker together deliver previously unimaginable levels of performance
and fidelity.
The Q FS75 Floor Stand has an extremely low surface area, which reduces re-radiated sound to virtually nil. It's less a speaker stand, more an entirely new loudspeaker support concept.
We hope you enjoy the Q Acoustics experience.
Important Safety Information and Warnings
Spikes should be fitted where floors are carpeted, for all exposed floors - wood, tiled etc use the rubber spike covers. To avoid damage when spikes are fitted, do not drag the speaker and
take care to place it where it cannot cause damage or pierce mains cables etc. Used properly, spike feet will not damage carpets.
The stand is pre-tensioned to a precise torque. Check with your retailer if you have any questions regarding this.
To clean use a lightly dampened cloth. Do not use abrasive cleaners or cleaners containing solvent.
Do not use close to a strong heat source – radiators, heaters or electrical equipment. Do not expose the stands to excessive cold, heat, humidity or sunlight.
This product contains small items that could be a choking hazard if swallowed.
Do not overtighten the fixings.
For speaker setup and placement, refer to the full speaker manual.
6