Publicidad
Idiomas disponibles
Idiomas disponibles
NOTE: When the scooter enters a stop state, the system will automatically
lock the motor. It can be unlocked when the power button is pressed.
When the battery is exhausted or the system is turned off by safety
shutdown, please do not continue driving the scooter; Otherwise, the
scooter will not be able to balance due to lack of battery. Under these
conditions, the driver is likely to be injured. If the battery reaches the
minimum, continued driving of the scooter will adversely affect the battery
life.
RECOMMENDATIONS
Before driving the scooter, please make sure you are familiar with driving
skills. Always practice with someone who can help you up and down.
- Wear casual (but not loose) clothing and flat shoes to maintain the
flexibility of the body.
- Please use it in open spaces.
- Make sure the surface is level.
- When driving on different terrain, you should slow down.
- The scooter is designed for a smooth track. Slow down if you drive the
scooter over an uneven surface.
FUNCTIONS
PEDAL SENSOR: The scooter has sensors under the pedal; When the
operator presses on the pedal, the scooter will automatically adjust it to an
equilibrium model. When driving, you must make sure that the pedal is
fully depressed; Please do not step on other components outside the pedal.
Do not place objects on the pedals to make the scooter run on its own; Can
increase the possibility of collision and cause personal injury and damages
to the same scooter.
BATTERY AND INDICATORS: The indicator is located in the middle of the
scooter. It is used to obtain information about the operation.
- Green: when start unit and battery is enough to drive.
- RED + WARNING ALARM when the battery runs out and you should stop
driving immediately. The Balance Scooter will switch off without further
indications and then lose balance. You run the risk of injury if you try to
continue driving.
- Operation indicator: When the pedal is activated, the operation indicator
lights up and the system enters the operating condition; When the system
detects an error, the indicator will change to red.
Publicidad
