Hunter NiteTime Plus 45030 Manual De Configuración Y Operación página 17

Override Operation Override Operation
The Override button on the front of the NiteTime Plus™ lets you The Override button on the front of the NiteTime Plus™ lets you
temporarily override the existing program and use the attached lamp or temporarily override the existing program and use the attached lamp or
appliance without programming. appliance without programming.
Press the Override button once to power the lamp or appliance On Press the Override button once to power the lamp or appliance On
or Off (depending on the current program sequence). To return the or Off (depending on the current program sequence). To return the
NiteTime Plus™ to its programming, press the Override button one NiteTime Plus™ to its programming, press the Override button one
more time. more time.
In the event the Override button is not manually pressed to return In the event the Override button is not manually pressed to return
to programming, the NiteTime Plus™ automatically reverts to to programming, the NiteTime Plus™ automatically reverts to
programming during the next time sequence. programming during the next time sequence.
The LED under the Override Button comes on when the timer output is The LED under the Override Button comes on when the timer output is
off. The LED goes off when the timer output is on. off. The LED goes off when the timer output is on.
43118-01 r100207 43118-01 r100207
17 17