ZKTeco C2E Serie Guía Rápida página 7

Step 3: Add the Device to the App
1.
Open the app, tap the "+" button on the top right corner of the
2
interface, and then select the "Add Device" option. Select the "Smart
Camera" option and then choose the corresponding model purchased.
2.
Select " Next
1
Enter the correct password for the Wi-Fi network you've selected. Then
press the " Next
Show the QR code towards the device lens, and the camera will scan
3. 2
the QR code. Once you hear a audio prompt and the Status LED blinks
blue rapidly, tap the "I Heard a Prompt" button on your mobile, the
App will connect the device automatically.
Note: Please hold the phone about 15 to 20 cm (6 to 8 inches) away
from the camera. You can slightly move your mobile device forward
and backward for better scanning.
4.
Once the notification "Added successfully" appears on the mobile
2
app, you can change the device's name manually. Tap the "Done"
button to complete the process.
Note: If you failed to connect your device to Wi-Fi, press and hold the
RESET Button for 5 seconds until you hear a audio prompt, then repeat
the above steps.
" if you have completed the above steps on the interface.
" button.
6