Hama VENDETTA Instrucciones De Uso página 2

KB Operating Instruction
I. Introduction
Thank you for choosing the „Ната Vendetta Wireless
PS3 Controller", and congratulations on your
decision. We are certain that our product will provide
you with a great deal of gaming pleasure for years to
come. This quick guide contains valuable information on
operating and configuringthe gamepad. Please keep
these instructions in a safe location for future reference.
II. Product Features
* 12 programmable buttons
* 23609 analogue sticks including key function
III. System Requirements
* PS3
* USB port
IV. PS3 installation
1. Connect the enclosed wireless receiver to the
USB port on your PS3.
2. Then press the , Home" button. The gamepad should
normally be detected by your PS3.
V. Functions
PS3 button
The PS3 button on the controller corresponds to the
PS button on the Sony PS3 controller. Press this button
for 2 seconds to go to the PS3 XMB window.
Vibration function
The controller is equipped with two internal motors,
which function only in games that also support Force
Feedback.
Refer to your game's manual or to the Sony website to
find out if your game supports the vibration function.
If problems persist, check whether vibration support has
been activated in the game's options.
Note: In order to support vibration, the PS3 console's
firmware must be updated to version 2.0 or higher.