Publicidad
Helpful Tips For best results:
Use daily.
Use the device on clean, dry skin only.
Do not use the device after the application of creams that
contain SPF as this could block light penetration.
Immediately following treatment, apply a serum or moisturiser
of your choice.
Maintenance:
1. This device has no serviceable parts. Users should not attempt
to service the device as this will damage it and void the warranty.
2. Device includes only an ON/OFF button. All settings are set to
the factory setting.
Cleaning:
1. Turn device off and unplug from any power source.
2. Wipe the tops of the LEDs with alcohol wipes or damp cloth to
remove any residue from skin oils after each use.
3. Clean the device body by using damp or microfibre cloth.
4. Allow the device to dry completely prior to use.
10
Troubleshooting:
System is not turning on:
a. Please ensure the device is firmly plugged in to a mains outlet.
b. If the device still does not work, please get in touch with
CurrentBody via the website.
System shuts off abruptly, prior to completion of 10-minute
treatment:
a. System is designed to shut off automatically after 10 minutes.
b. System may shut off after multiple repeated uses if the device
exceeds desired temperature. Allow the device to cool for
several minutes and try again.
Some lights appear turned off:
The infrared (IR) light spectrum is not visible to the human eye.
These lights will look as if they are not on, but they are operating
properly. If the red, visible lights are on, then the device is
operating as designed.
The device does not switch off after a 10 minutes treatment:
The device may be faulty. Please get in touch with CurrentBody
via the website.
The LEDs flicker during use:
The device may be faulty. Please get in touch with CurrentBody
via the website.
11
Publicidad
