Publicidad
Idiomas disponibles
Idiomas disponibles
HOW TO INSTALL AND USE THE SYSTEM
HOW TO INSTALL AND USE THE SYSTEM
1.- Connect the AC power adapter to DC IN connector in the receiver.
2.- Plug the AC power adapter into an outlet. The power LED will light
up.
3.- Unfold the antenna and place it in a 90° position.
4.- Set the volume level to the minimum (the know totally turned to the
left)
5.- Plug the audio cable into Audio Out jack, and the other extreme to a
power amplifi er. Turn the amplifi er on.
6.- Open the battery compartment in the microphone and place 2 new
AA alkaline batteries, paying attention to polarity.
7.- Place the power switch at on position. The RF LED will light up.
8.- Talk over the microphone, slowly, adjust the volume level until you
hear the required level.
9.- If the volume level is too loud, the yellow LED will light up in the
receiver. Set the volume level.
10.- If you want to mute the microphone, place the switch to Mute
position, the green LED keeps lighting.
11.- Turn the system off after their use.
The indicator LED in the microphone will light up when the
The indicator LED in the microphone will light up when the
batteries' energy is almost empty, please replace the batteries.
batteries' energy is almost empty, please replace the batteries.
The distance between the receiver and the microphone won't be
The distance between the receiver and the microphone won't be
more than 30 metres.
more than 30 metres.
ENGLISH-05
Publicidad
