Lindy 43408 Manual De Usuario página 3

User Manual
Introduction
Thank you for purchasing the Lindy 100m 2 Port USB 2.0 Cat.6 Extender
to provide trouble free, reliable operation. It benefits from both a LINDY 2 year warranty and free lifetime
technical support. To ensure correct use, please read this manual carefully and retain it for future
reference.
This Lindy USB 2.0 Cat.6 Extender can be used to extend the distance between two USB peripheral
devices and the host computer by up to 100m. A standard, low cost Cat.6 network cable (not included) is
used to bridge the connection between the transmitter and the receiver unit. For best performance and
compatibility, we recommend the use of solid core patched cables.
The Extender features bidirectional Power over Cable (PoC) functionality, which provides additional
flexibility. This allows power to be supplied alongside data through Cat.6 network cable in a point-to-point
connection between the transmitter and receiver, meaning only a single power supply is required at the
transmitter or receiver unit.
Package Contents
• Local/Transmitter Unit with Mounting Brackets
• Receiver Unit with Mounting Brackets
• USB 2.0 A/B male cable (approximately 90cm)
• Multi-Country Power Supply, 12VDC 1A
• This Manual
Features
•
Supports USB 2.0 high-speed and USB 1.1 (full-speed, low-speed) devices
•
Integrated two port USB hub
•
Supports distances up to 100 meters using Cat.5e/6 (or better) UTP/STP cables
•
True plug and play without any driver installation
•
Supports all major Operating Systems with USB support
•
Power LED indicator (green) on transmitter and receiver unit
Specification
•
Transmitter (TX): Input Port 1x USB 2.0 Type B, Output Port 1x RJ45, 5.5/2.1mm Socket for PSU
•
Receiver (RX): Input Port 1x RJ45, Output Port 2x USB 2.0 Type A
•
Operating temperature: 0° - 40° C (32°F - 104°F)
•
Storage temperature: -20° - 60°C (-4°F - 140°F)
•
Humidity: 20 - 90% RH (non-condensing)
Installation
1. Connect the transmitter unit to a USB port on the host computer by using the included USB 2.0 Type A
to B cable.
2. Place the receiver unit near the USB device(s) in the desired remote location.
3. Connect the included power supply either to the transmitter or receiver unit, depending on where it is
required.
4. Connect the transmitter to the receiver unit by using a Cat.5e/6 (or better) cable (not included).
5. The Extender is now correctly installed and the USB devices can be connected.
.
This product has been designed
English