Descargar Imprimir esta página

Buffalo FC374 Manual De Instrucciones página 5

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 32
Using the timer
The digital timer with audible alarm can be set from 1 second to 15 minutes. The timer provides an
audible alarm only; after the set time expires unit will continue to operate at set temperature.
START/STOP: Press START/STOP to start timer, press again
to stop. The timer will provide an audible alarm after the
set time. The alarm will beep 10 times and the display will
continue to flash until timer is reset (press the START/STOP
button).
UP: Press UP to add extra time.
DOWN: Press DOWN to reduce time.
PROGRAM: There are a total of 6 programmable timer settings. The default factory program settings
are given below.
Program
Factory preset time
To change the length of a program select the program you want to change by scrolling using the
PROGRAM button.
Adjust the program time by using the UP and DOWN buttons. Press START/STOP to commence the
count-down. The new program time will be automatically stored.
If the unit is left without power for more than 24hrs the timer settings will revert to the factory
defaults.
Cleaning, Care & Maintenance
The Fryer should be cleaned after each day's operation; however it may require cleaning more often,
depending on the volume of frying carried out.
1. Switch off the power and disconnect from the power supply by removing the plug from the socket.
2. The Fryer must be left until the oil has cooled to room temperature before cleaning.
3. Empty oil by opening the drain tap at the front of the unit.
Note: If the oil is to be reused, it should be filtered.
4. Once the oil has been emptied from the fryer, the head unit can be tilted back enabling the pan to be
cleaned using warm soapy water.
Warm soapy water is recommended for cleaning. Cleaning agents after prolonged use can cause damage
to stainless steel.
The main body can also be cleaned with warm soapy water. Remove the head unit and element before
cleaning takes place.
The head unit cannot be immersed in water, but can be wiped down with a damp cloth.
After cleaning as above, please use a dry cloth to clean the appliance to ensure there is no water on the
heating element and in the water oil pan.
FC374-FC375-FC376-FC377_ML_A5_v3_20211026.indb 5
FC374-FC375-FC376-FC377_ML_A5_v3_20211026.indb 5
1
2
3
4
00:30 01:00 01:30 02:00 02:30 03:00
UK
5
6
5
2021/10/26 11:36
2021/10/26 11:36

Publicidad

loading

Este manual también es adecuado para:

Fc375Fc376Fc377