Publicidad
Idiomas disponibles
Idiomas disponibles
˜ Switching on/off
CAUTION! Laser beam ‒ Do not look into the beam
Turn your head away or close your eyes to prevent looking into
the laser beam. Risk of eye injury!
Switching on: Briefly press the on/off button
Switching off: Press and hold the on/off button
˜ Using horizontal and vertical laser lines
After switching on, the 360° laser line
line
are activated.
[
]
Activate the 360° laser line
Briefly press the on/off button
Activate the vertical laser line
Briefly press the on/off button
˜ Working with the automatic leveller
1. Push the levelling slide switch
2. Place the product on a horizontal, solid surface or fasten the product
to a tripod (see "Working with the tripod").
3. Switch on the product. The leveller light
Leveller light
Green
Red
NOTE: In the event of vibrations, the laser will level itself
automatically. Wait until the laser lines no longer move.
only:
1 ]
[
.
[
]
only:
[
]
.
[
]
to the left (open lock).
[
]
Meaning
[
]
Automatic levelling is possible. Levelling
is complete once the laser lines no longer
move.
Automatic levelling is not possible.
The laser lines flash.
.
[
]
for 2 seconds.
[
]
and the vertical laser
1 ]
[
lights up.
[
]
!
1 ]
[
[
]
GB/IE
25
Publicidad
