Publicidad
Idiomas disponibles
Idiomas disponibles
English
Package content
• PCI Express card
• Low profile bracket
• 2 x SATA cable, length ca. 35 cm
• Mounting material
• Screwdriver
• 2 x thermal pad
• User manual
Safety instructions
• Protect the product against moisture
• Avoid anti-static electricity when installing the card
Hardware Installation
1.
First, install the M.2 SSD onto the PCI Express card.
2.
Turn off your PC and unplug the power cord.
3.
Open the housing.
4.
Remove the slot holder from the available PCI Express slot.
5.
Insert the card straight and carefully into the free PCI Express slot, until it is
well seated.
6.
Use a screw to attach the card to the housing.
7.
If you also occupied the SATA M.2 slot, you need to connect the PCI Express
card with your motherboard by using the SATA cable.
8.
When using the mSATA slot, the appropriate SATA connector on the card
must be connected to the motherboard with a cable.
9.
Reattach the housing and connect the power cord to the AC adapter.
10. Switch on your computer.
Note
The included thermal pads can be packed between SSD and PCIe card and then
serve as heat dissipation.
-3-
Publicidad
