Deltaco Gaming GAM-169-T Manual Del Usuario página 10

PS5
The controller has very limited compatibility with PS5. Similar to an original PS4 control-
ler, PS4 games on PS5 does work, however a PS5 game on PS5 does not work.
Please note that the game controller is not suitable for starting up a PS5. We
recommend using an original controller for PS5 for starting up and then using this game
controller as a back up or as a 2nd game controller.
PC
First time connection to a PC: connect the game controller with the USB cable.
The game controller will set to PS4 mode (default setting).
To switch between "XInput" mode and PS4 mode press and hold the share button +
option button for 3 seconds.
If your PC has Bluetooth, then you can connect to it wirelessly through the Bluetooth
settings.
Bluetooth device
While connected wirelessly the game controller will set to PS4 mode.
Connect to a Bluetooth device: connect the game controller by pressing and holding the
share button + home button until the LED will flash. Connect to the game controller
via the Bluetooth settings on your device.
Some Bluetooth compatible devices include: Android phones, iPhone, smart Android
TVs and Android tablets. Other Bluetooth devices might be compatible as well.
Bluetooth devices work with limited functionality. For example, buttons and some
games may not work as expected.
iOS 13.0 or higher is required for compatibility with games on Apple store.
The controller will enter sleep mode after 60 seconds if the connection is unsuccessful.
Switch
Connect the USB cable to the game controller and to the Switch console for wired
connection.
Press the home/"PS" button. The LED will turn solid, indicating successful connection.
Disconnect the cable, the game controller now works wirelessly via the Bluetooth
connection.
Alternatively for wireless connection, turn off the controller and from the game
console's settings go to: Controllers => Change Grip/Order.
Press and hold the option button + home button until the LED flashes and the control-
ler should appear on the screen. Follow the on-screen instructions.
Reconnect: Press and hold the home/"PS" button for about 1 second, the game control-
ler will connect automatically.
You can also play on the Switch with the cable connected, thus charging the game
controller at the same time.
Off button
To power the controller off, use the off button.
Turbo button
Turbo works on these buttons: Triangle, square, circle, cross, L1, L2, R1, R2
1. Activate turbo: Press turbo button + button that you want turbo on.
2. Activate automatic turbo: Press turbo button + on the button that already has
activated turbo.
3. Turn off turbo: Press turbo + on the button that has automatic turbo activated.
The speed levels (presses per second) for turbo are: 5, 15, 25.
To increase or decrease speed, press and hold the turbo button and use the right
stick(R3) and press up or down. Up= increase speed. Down= decrease speed.
To deactivate all the turbo functions at the same time, press and hold the share button
+ turbo button for 5 seconds until it vibrates.
3.5 mm
Use the 3.5 mm stereo connection to connect a microphone, headphones, or a headset.
3.5 mm (headphone) connection works in Bluetooth and wired for PS4. Only as wired
with Switch and PC ("DirectInput").
Features
This product has 2x vibration motors, and a six-axis sensor function.
Firmware
The firmware does not normally need updating, but in case of trouble there might be
an available update on our website. If there is an update, you can update the firmware
through a USB-A to USB-C cable on a windows PC.
Macro buttons
Macros can be set with all platforms, including PS4, Switch and PC. You can store up
to 2 macros.
The ML/MR buttons can be set to 1-14 button presses respectively.
These 14 buttons can be set with macros:
Triangle, square, circle, cross, L1, L2, R1, R2, L3, R3, up, down, left, right.
The macro will be a set a sequence of button presses, for example first R2 and then L2.
Press and hold the turbo button for 3 seconds, the controller will vibrate, and a LED
will flash to confirm it is ready.
Press the button sequence/macro that you want to set. Then press ML or MR buttons
to save. The controller will vibrate to confirm, and the LED will change to static light.
Press ML or MR to activate the macro.
10