Descargar Imprimir esta página

2N Access Unit QR Manual Breve página 2

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 10
Product Overview
Read this manual carefully before using the product and follow the instructions
and recommendations included therein. Refer to wiki.2n.com for complete user
documentation.
2N Access Unit QR is an access unit equipped with a full HD camera used as an
elegant QR code reader. Thanks to modularity, the assembly can be complemented
with another 2N Access Unit 2.0 module (including the compatible 2N IP Verso
modules except for 2N IP Verso – Induction Loop) and assembled according to
individual needs. It provides a reliable and innovative building access control and
easy interoperability with other systems for enhanced building security. 2N Access
Unit QR can be used as an access unit for office buildings, residential areas and/or
other applications.
Installation Requirements
• LAN connection, UTP cable Cat5 or higher with an RJ-45 connector.
• PoE 802.3af or 12V DC ±10% / 3 A power supply.
• Completed installation of a surface mounting chassis or a flush mount
box for flush mounting.
Mechanical Installation
There are two ways how to install the device: flush mounting into classic
brick / plasterboard walls or surface (wall) mounting.
• For both the installation types, the access unit can be complemented with the 2N
Access Unit 2.0 extending modules (including the compatible 2N IP Verso modules
except for 2N IP Verso – Induction Loop).
• The recommended installation height is 1350 mm from the ground till
the device camera level. The installation height may vary depending on
the device use.
!
• Before starting the mechanical installation on a selected place, make sure
carefully that the preparations associated with it (drilling, wall cutting) cannot
damage the electrical, gas, water and other existing wires and pipes.
• The warranty does not apply to the product defects and failures arisen as a
result of improper installation (in contradiction with these instructions).The
manufacturer is neither liable for damage caused by theft within an area that
is accessible after the attached electric lock is switched on. The product is not
designed as a burglar protection device except when used in combination with a
standard lock, which has the security function.
• When the proper installation instructions are not met, water might get in and
destroy the electronics.. The intercom circuits are constantly under voltage
and water infiltration causes an electro-chemical reaction. The manufacturer's
warranty shall be void for products damaged in this way!
• Do not remove the plastic film on the seal inside the frame, otherwise water may
leak and damage the electronic components.
!
• Use the product for the purposes it was designed and manufactured for, in
compliance herewith.
• The manufacturer reserves the right to modify the product in order to improve
its qualities.
• 2N Access Unit QR contains no environmentally harmful components. Dispose of
the device in accordance with the applicable legal regulations.
Electrical Installation
Description of terminals, connectors and available components:
1
EN

Publicidad

loading

Productos relacionados para 2N Access Unit QR

Este manual también es adecuado para:

916201