Whalen Homestead HSTDT Instrucciones De Montaje página 5

2
1
ready to assemble. To avoid causing damages to the thread, DO NOT over-tighten the nuts or bolts.
3. Remove the plastic caps from the hanger bolts of the Legs (B). Attach 4 Legs (B) to the apron corners of
the Table Top (A) by inserting the hanger bolts pre-attached on Leg through the pre-drilled holes on
corner blocks, and fit the Flat Washer (3), Lock Washer (2) and Hex Nut (1) onto each hanger bolt.
Securely tighten the Nuts with the Open Wrench provided.
4. Ask for assistance to lift the unit upright.
Please call for replacement parts or assistance:
Whalen Furniture Mfg. Inc.
Assembly Instructions
A
A
DO NOT fully-tighten the nuts or bolts initially until all the nuts or bolts are
1-866-942-5362
Page 5
(8 used in this step)
Lock Washer
(8 used in this step)
(8 used in this step)
B
Factory # 75-14697
Stock # HSTDT
Hex Nut
①
②
Flat Washer
③