Descargar Imprimir esta página

Proel Technology PSU110 Manual De Uso página 2

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 6
INTRODUCTION
PSU110 is a universal high performance power supply for pedal effects and other devices needing an external
power adapter. It provides 8x 9VDC outputs, 1x 12V DC output and 1x 12V AC output. Each output is completely
isolated and has short-circuit protection in order to operate safety. PSU110 can deliver 2000mA reliable power
in total and features a superior quality transformer for noise free operation and a full cable set.
1. POWER SUPPLY outputs
These are the 10 sockets for the power supply outputs. See the below table for the specifications.
2. PWR indicator
The PWR LED shows when the PSU110 is powered. If the LED doesn't light, be sure that the PSU110 is connected
to the mains line and the POWER switch is activated.
3. DIP switches
The DIP switches permit individual adjustment of the 9VDC outputs (see the below table for details). For Output
7 and 8 the DIP switches enable a fine power adjustment. The number on DIP Switches 1-8 correspond to DC
output 1-8 respectively.
4. LINE VOLTAGE selector
This switch sets the AC voltage line of your country (usually it is set by factory and isn't necessary to change it).
The 115V setting is for mains line in the range of 105-120V~ and 230V for the range of 210-240V~.
WARNING: an incorrect setting of AC LINE VOLTAGE could damage seriously the internal electronics!
5. POWER switch
PSU110 is "ON" when the switch is in the "I" position.
6. FUSE holder
Here is where the mains protection fuse is placed.
REPLACE THE PROTECTION FUSE ONLY WITH SAME TYPE AS SHOWN ON THE PRODUCT.
IF AFTER THE SUBSTITUTION, THE FUSE INTERRUPTS AGAIN THE APPARATUS WORKING, DO NOT TRY
AGAIN THEN CONTACT THE PROEL SERVICE CENTER.
7. AC~ socket
Here's where plug in the mains supply cord. You should always use the mains cord supplied with the PSU110.
Be sure PSU110 is turned off before you plug in the cord.
Model
System Type
Output
N.
1-4
5-6
7-8
9
10
MAX total power output
Power supply
Dimensions (W x H x D)
Weight
ENGLISH
TECHNICAL SPECIFICATIONS
PSU110
10-Out Power Supply
DIP switch OFF
Voltage
9 V DC
9 V DC
9 V DC
12 V DC
12 V AC
2000 mA
Selectable 100-120 VAC / 220-240 VAC, 50-60 Hz
169 x 68 x 107 mm
1,60 Kg
Max Current
Voltage
150 mA
12 V DC
250 mA
15 V DC
150 mA
4-12V DC adjustable
250 mA
250 mA
DIP switch ON
Max Current
100 mA
150 mA
150 mA

Publicidad

loading