Publicidad
Idiomas disponibles
Idiomas disponibles
5. The mouse is charged whether the power switch is on or not. Put the power
switch to the middle position, the LED backlight and roller will light up. The mouse
takes about four hours to fully charge.
6. Insert the USB cable to automatically switch the mouse to the cable connection.
WIRELESS CONNECTION
1. Remove the mouse cover, remove the USB receiver, and plug it into any available
USB port on your computer.
2. Slide the power switch to the LED On or No LED On state.
3. When the logo light is on, press the 2.4G/BT mode switch button . If the roller
Light OFF indicates that it is 2.4G mode.
4. The computer will automatically recognize and configure the mouse.
5. When the configuration is complete, the mouse is ready to use.
6. When the battery is low, the roller light will blink.
7. Charge the mouse when the battery is low.
BLUETOOTH CONNECTION
1. Slide the power switch to the LED On or No LED On state.
2. When the logo light is on, press the 2.4G/BT mode switch button. If the roller
light blue indicates that it is BT mode.
3. And then press the left, middle and right buttons for 3 seconds, and the blue light
flashes quickly to enter the Bluetooth pairing mode.
Turn on Bluetooth on the computer and search for Bluetooth devices.
When the indicator is off, the Bluetooth connection is successful.
Bluetooth device name: Shift
FEATURES
MOUSE LEFT AND RIGHT HOT SWAPPABLE
Remove mouse cover and use switch puller to place new switch into push-close
switch socket so you can adjust operating force and feedback to your liking,
or replace worn or damaged switches.
Publicidad
