Descargar Imprimir esta página

Cooper Lighting WaveLinx Area Controller G2 Instrucciones De Instalación página 10

Controlador de área g2

Publicidad

Idiomas disponibles

Idiomas disponibles

WaveLinx
• Tile Mount Sensor.
• Connected luminaire dims to 75%
• All luminaires turn ON when the first occupancy sensor senses motion
• All luminaires turn OFF when the last occupancy sensor times out unoccupied
• All wallstations in the default area control all luminaires together.
• All integrated sensors, Tile Mount and Ceiling sensors create an occupancy group
• Relay with 0-10V
• Connected luminaires dim to 75%
• All wallstations in the default area control all luminaires together.
• All luminaires turn ON when the first occupancy sensor senses motion
• All luminaires turn OFF when the last occupancy sensor times out unoccupied
• Relay turns ON/OFF based on occupancy
• Receptacle
• The controlled outlet will turn ON/OFF based on occupancy
• Wallstation
• All wallstations in the default area will control all luminaires in the default area based on out-of-the-box scene
definitions.
• Ceiling Sensor
• The LED on the sensor will flash when detecting occupancy
• All integrated sensors, Tile Mount and ceiling sensors create an occupancy group
Connecting the WaveLinx Area Controller to the Building LAN
1.
Wired Connection - Building LAN connection
• Connect the WAC to the building PoE switch or PoE injector into the normal network.
• Physical connection to the building LAN and receiving an IP address will automatically disable the wireless connection method
• WAC will automatically receive a DHCP IP address when connected to the building LAN
• Using the WAC internal web page,
• Statically assign the IP address of the WAC
2.
Wireless Connection - WAC as an access point
• WAC default SSID will be: cooper-xxxxxxxxxxxx
• (where **** are all twelve characters of the unit ethernet MAC address found on the Cooper Lighting Solutions label at the
bottom front of the WAC)
3.
Wireless Connection - WAC as a client to the building wireless network
• Using the WAC internal web page,
• Enter the building wireless login credentials.
• Building wireless login credentials are secured in the WAC by secure web pages.
IB503099ML page 10
May 2024
WaveLinx Area Controller G2 (WAC)
www.cooperlighting.com

Publicidad

loading

Este manual también es adecuado para:

Wac2-poeWac2-120