Publicidad
Idiomas disponibles
Idiomas disponibles
c) When battery pack is not in use, keep it away
from other metal objects, like paper clips,
coins, keys, nails, screws or other small
metal objects that can make a connection
from one terminal to another. Shorting the
battery terminals together may cause burns or a
fire.
d) Under abusive conditions, liquid may be
ejected from the battery; avoid contact. If
contact accidentally occurs, flush with water.
If liquid contacts eyes, additionally seek
medical help. Liquid ejected from the battery
may cause irritation or burns.
e) Do not use a battery pack or tool that is
damaged or modified. Damaged or modified
batteries may exhibit unpredictable behaviour
resulting in fire, explosion or risk of injury.
f) Do not expose a battery pack or tool to
fire or excessive temperature. Exposure to
fire or temperature above 130 °C may cause
explosion. NOTE The temperature „130 °C" can
be replaced by the temperature „265 °F".
g) Follow all charging instructions and do not
charge the battery pack or tool outside
the temperature range specified in the
instructions. Charging improperly or at
temperatures outside the specified range may
damage the battery and increase the risk of fire.
6) Service
a) Have your power tool serviced by a
qualified repair person using only identical
replacement parts. This will ensure that the
safety of the power tool is maintained.
b) Never service damaged battery packs. Service
of battery packs should only be performed
by the manufacturer or authorized service
providers.
SAFETY WARNINGS FOR BATTERY
a) Do not open the battery. Danger of short-
circuiting.
b) Protect the battery against heat, e. g.,
against continuous intense sunlight, fire,
water, and moisture. Danger of explosion.
c) In case of damage and improper use of the
battery, vapours may be emitted. Ventilate
the area and seek medical help in case
of complaints. The vapours can irritate the
respiratory system.
d) Use the battery only in conjunction with
your Ferm product. This measure alone
protects the battery against dangerous
overload.
e) The battery can be damaged by pointed
objects such as nails or screwdrivers or by
force applied externally. An internal short
circuit can occur and the battery can burn,
smoke, explode or overheat.
2. PRODUCT INFORMATION
Intended use
Only use the following Ferm Industrial FI20V
battery platform charger. Using any other charger
could cause serious injury or damage the battery.
CDA1131P Quick charger
The batteries of the Ferm Industrial FI20V battery
platform are interchangeable with all the Ferm
Industrial FI20V battery platform tools.
TECHNICAL SPECIFICATIONS
Model No
Battery Type
Voltage
Capacity
Recommended charger
Weight
DESCRIPTION
The numbers in the text refer to the diagrams on
pages 2.
1. Battery unlock button
2. Battery LED indicators button
3. Battery LED indicators
4. Battery
3. OPERATION
Before any work on the power tool,
remove the battery.
The battery must be charged before first
use.
CDA1132P
Lithium-Ion
20V
2.0 Ah
CDA1131P
0.38 kg
5
Publicidad
