Publicidad
Idiomas disponibles
Idiomas disponibles
WY200 series robotic pool floor cleaner is a new and efficient robotic pool
floor cleaning equipment. It can automatically clean the swimming pool
without discharge of the pool water. At the same time, through the
filtration system, it collects the suspended solids and sediments in the
water.
The main machine body is powered by 25.2V/6.4AH lithium ion battery
pack, so it has high safety.
Before using this product, please read the user manual carefully so
that you can use this machine correctly.
1.Requirements for machine position during charging: See Article 4 of
"Important Tips" on page 1.
2.Please do not use other chargers to charge this machine, please do not
use this charger to charge other equipment!
3.Make sure that the switch is placed in the OFF position before charging
the machine.
4.Do not turn on the machine for cleaning when charging!
5.The cleaning machine shall carry out cleaning under 10°C-35°C
environment!
6.Charge the machine before the battery is completely exhausted. When
the yellow light of the machine is on, please charge the machine in time.
7.Do not charge the machine when the battery is full. Overcharging will
reduce the life of the battery.
8.The machine should be charged under 5°C-35°C environment. When the
battery is overheated, it shall be cooled before charging.
9.If the battery will not be used for a long time (more than 3 months), it
shall be charged.
10.Make sure the charging port is dry before charging.
06
Publicidad
