Publicidad
Idiomas disponibles
Idiomas disponibles
CLEANING THE NOZZLES
AUTOMATICALLY
To clean the nozzle while using the toilet (sitting on
the seat), follow the procedure below using the
remote control
1
2
3
CLEANING/REPLACING THE NOZZLE TIPS
The nozzle tips can be removed for optimal cleaning and replacement.
Note: To extend and retract the nozzle, see "Cleaning the nozzles manually".
When the nozzle is extended, turn the nozzle tip to
the left and pull it off.
* These are the instructions for replacing the rear-washing nozzle tip; turn the tip in the other direction when
replacing the front-washing nozzle tip.
FINAL STEP
Follow the first step to turn the auto-flush/pre-flush function* to ON.
* Only if the auto-flush kit is installed.
DESCALING
1 Descaling is necessary when the GROHE LOGO
is blinking.
2 It blinks after 3 months of use (period can be
changed).
3 Please purchase the "Descaling Kit":
Product no 1015469990
4 For details such as specific methods of use,
please refer to the User Manual online or the
manual included with the descaling kit.
Press the [Nozzle
self-cleaning] button.
1
MANUALLY
The nozzles can be extended for manual cleaning
with a soft cloth while not using the toilet (not sitting
on the seat). Please follow the procedure below using
the remote control
1
2
3
2
3
To put the nozzle tip back on, place it as shown in
the picture onto the nozzle and turn it to the right.
1
2
3
1 Press the [Nozzle
self-cleaning] button.
2 Press the [Nozzle
self-cleaning] button
again: the current nozzle
retracts and the other
nozzle extends without
spraying water.
3 Press the [Nozzle
self-cleaning] button
again; the nozzle
retracts
4
Press [Rear washing]
and [Nozzle self-
cleaning] simultaneously
for 2 seconds
Publicidad
