Haden HC03040-US Manual De Instrucciones página 11

3. Water droplets may build up in the above area of the funnel
and drip onto the product base during brewing. To control the
dripping, wipe off the area with a clean, dry cloth after each use.
4. Use a damp cloth to gently wipe the warming plate. Never use
abrasive cleaner to clean it.
5. Replace all parts and keep for next use.
REMOVING MINERAL DEPOSITS
To keep your coffee maker operating efficiently, periodically you
should clean away the mineral deposits left by the water according
to the water quality in your area and the frequency of use.
1. When it is time to perform descaling for the coffee maker, the
CLEAN button will flash and the display will show CLEN.
2. Fill the water tank with water and descaler to the MAX level as
indicated in the water tank. (The scale of water and descaler is
4:1, the detail refers to the instruction of descaler.
For a natural alterative you can use the citric acid instead of the
descaler (one hundred parts of water and three parts of citric acid).
3. Place the carafe in position on the warming plate.
4. Press the CLEAN button once, the coffee machine will enter the
descaling procedure and starts to perform descaling, at that
time, the indicator of CLEAN button illuminates solidly.
5. Once the solution in the water tank is boiled away, the indicator
of CLEAN button extinguishes and the descaling is completed.
6. Refill the water tank with clean water and press the BREW/OFF
button to rinse the machine. Repeat for at least 3 times.
www.hadenusa.com
11