Caliber RMD 057 Guia De Inicio Rapido página 5

RMD 057
QUICKSTARTGUIDE
Standard Operation
Power On/Off
Press the [POW] button (1) to turn the device on or off.
Playback Mode
Press the [MOD] button (8) to switch between FM radio, USB/SD (only if inserted into the device), Bluetooth, and Aux-in.
Audio and Lighting Settings
Volume
Turn the [VOL] knob (2) to adjust the volume.
Audio and Lighting Menu
By briefly pressing the [VOL] button (3), you open the menu.
Press the button again one or more times to navigate to the next setting. The settings appear in this order: Time, Bass, Treble, Balance, Fader,
Equalizer, Loudness, Lighting*.
To change a setting, turn the [VOL] knob (2) and confirm the choice by pressing this button. After about 5 seconds of inactivity, this menu will
automatically close and return to playback mode.
*If you have connected the orange wire in the ISO connector to your car's light switch, the buttons and display lighting of the car radio will
automatically dim when the car lights are turned on. If you do not want this, you can disconnect this connection.
Radio Operation
Searching for Stations
In radio mode, you can automatically search for the next station by briefly pressing the button (10) or the button (11). Manually search for
a station by pressing these buttons for a longer duration.
Saving Stations in Memory
To save a selected radio station in memory, press and hold one of the numbers 1 through 6 on the remote control. The chosen number will
then appear on the right side of the display, indicating that the station is stored in memory. Pressing the same number in radio mode will activate
this station again.
By pressing the [CH+] button (16) and [CH-] button (17) on the radio, you can go to the next or previous stored station. By pressing these
buttons for a longer duration, you can directly save the currently tuned station in memory.
The [BAND] button (9) switches the FM preset band from F1 to F3. In each band, you can store 6 preset stations, allowing a total of 18 stations
to be stored.
Press the [APS] button (15) to automatically save preset stations. In this mode, 6 stations will be programmed automatically in all 3 frequency
bands. Note: This will erase all previously saved stations!
RDS (Radio Data System)
AF, TA, and PTY are RDS functions.
The clock/time will be automatically set after some time by the RDS signal. Press the [TA/AF] button (14) briefly to toggle TA on/off. If you have
programmed stations with traffic information, the radio will automatically switch to this station when traffic information is broadcasted and return
automatically when the traffic information is finished. This also happens when playing music, for example, from a USB or SD card. Press and hold
the [TA/AF] button (14) to toggle AF on/off. When using AF, the radio (for RDS stations) will automatically search for the alternative frequency if you
go outside the coverage area of that frequency. Note: TA and AF require a radio station that supports this and will skip other stations during automatic
search. Press the [PTY] button (13) to toggle PTY on/off. By pressing and holding the [VOL] button (3), you open the RDS menu. Press it again
briefly to go to the next step. In this order, you can use the [VOL] knob (2) to enable or disable the AF and TA functions. The third option in this menu
is PTY (program type). By turning the [VOL] knob (2), you can change the genre, and the radio will automatically try to tune in to a station with this
indication.
Note: RDS may not be available in every country.
Bluetooth Operation
Pairing
Use the [MOD] button (8) to go to Bluetooth. The letters "BT" will flash on the screen to indicate that the device is ready to connect.
Activate your phone's Bluetooth function and search for available devices. Select "CALIBER_RMD057" and enter the password "0000" (if applicable).
If the connection is successful, "BT ON" will appear on the screen. The next time, the connection will be made automatically.
Incoming Calls
Answer: press the green handset (9) during an incoming call
End: press the red handset (8)
Reject: press the red handset (8) during an incoming call
Making Calls (via Remote Control)
Press the green handset (2) on the remote control. Enter the phone number using the numbers 1 through 0. Press the green handset (2) again to
make the call. Disconnect with the red handset (3).
Playing Music
Press the [CH+] button (16) to start or pause playback. If the music is streamed through an app, the app should be 'open' on the phone. By briefly
pressing the button (10) or the button (11), you can go to the previous or next track.
USB/SD Operation
Insert the USB/SD card into the USB*/SD reader. The device will automatically start playing the music.
*Note: The Type-C USB connection is only for charging. No files can be played through this port.
Playback Control
Press the [CH+] button (16) to start or pause playback. By briefly pressing the button (10) or the button (11), you can go to the previous or
next track. By pressing and holding these buttons, you can fast forward or rewind.