Publicidad
STEP 36
19r
(x4)
With a person on each side, carefully lift
the bed frame in the closed position. While
one person pushes the bed frame into the
cabinet, passed the 90 degrees, the other
person is to engage the "front" Gas Piston
(19h) on each side of the unit, to the front
pin of the Left and Right Pivot Arm (19e &
19f). Then tightly secure with two Nuts
(19r).
To engage the "rear" Gas Piston (19h) on
each side of the unit, slowly and carefully
wiggle the bed frame back and forth until
you can insert the Gas Pistons (19h) onto
the rear pin of the Left and Right Pivot Arm
(19e & 19f). Then tightly secure with two
Nuts (19r).
19e
19r
19r
ameriwoodhome.com
19t
(x1)
19r
19r
push here
into cabinet
19f
this step is continued
on next page...
48
Publicidad
