Publicidad
18
500 SERIES PARAMETRIC EQUALISER 512
500 SERIES PARAMETRIC EQUALISER 512 Getting Started
Legend L10 500 Series Rackmount Chassis for 10 Modules
Legend L6 500 Series Rackmount Chassis for 6 Modules (supplied rack ear kit not shown)
The 512 EQ module is designed to be
mounted into a 500 series rack
chassis or box, such as the Midas
Legend L6 or L10. The L6/L10 supplies
the input and output connections to the 512
module, as well as internal power to run
the module.
With the power to the L6/L10 turned
off, install the 512 module by sliding
it in carefully so its rear connector
correctly fits into the corresponding
multi-pin connector of the L6/L10. Use 2 screws to
secure the 512 module to the front top and
bottom rails.
Blank spaces in your L6 or L10 can be
filled using the Midas L1B blank
plates. These plates will prevent dirt,
dust and other objects from entering
the unit.
Insert any other modules in
your system.
19
Quick Start Guide
Connect your audio equipment to the
input and output of the L6/L10.
Turn on the power to the L6/L10.
The 512 module is equipped with an
internal power on/off mute relay.
After power up, there is a 2 second
delay before the output is connected, to avoid
power-on thumps. The relay also prevents
power-off thumps by muting the output during
power down.
Publicidad
