Publicidad
Idiomas disponibles
Idiomas disponibles
CAUTION:
To avoid personal injury to yourself
and/or property, we recommend someone assist
you during the door reversal process.
1. To access the lower hinge assembly, tilt back the
refrigerator cabinet or lay the refrigerator on its
back+ (Fig+A)
2. Remove both levetlng legs located at the front of the
cabinet.
3+ Remove the screws holding
the lower hinge
assembly to the cabinet+ (Fig+A)
4, Remove
the main door assembly
from
the
refrigerator cabinet (open door and put/down)
5. Remove
the screws
from
the middle
hinge
assembly, Then remove the hinge and freezer door,
(Fig. B)
6o Remove (unscrew) the lop hinge ptn_ (Fig+ C)
7. Re-install the main door top hinge pin on the
opposite side of the cabinet. (Fig+, C )
8. Remove the door plug and door bushing tocated on
the top and bottom of each door assembty
9. interchange positions. (ie. door plug right side, door
bushing left side,)
10. Re-install freezer door assembly on cabinet.
11. Re-install
the midd}e
hinge assembly
on the
opposite side+
12. Make sure the door assembly is properly aligned on
the cabinet, before tightening hinge screws
13o Re-install main door assembly on cabinet+
14. Reotnstalt the lower hinge assembly on the opposite
side. Making sure to change bushing and screw on
opposite sides on bottom of unit
15. Make sure the door assembly is properly afigned on
the cabinet, before tightening lower hinge screws,+
16, Re-install both ieveflng ]egs.
The process is now complete,
Fig+ A
Fig. B
_._...._, _
i=.=L_,_==
+.
Fig_ C
To replace the refrigerator light bulb:
1. Remove the screw from the light bulb cover,
2o Pull the light bulb cover downward,
3. Unscrew the bulb+
4+ Replace with a standard 40 watt appliance bulb only,
3
Publicidad
