Platinet PVCS2IN1 Manual De Instrucciones página 5

EN
CORDLESS HANDHELD VACUUM CLEANER INSTRUCTION MANUAL
• After the body placed back for about two seconds, the indicator light on the handle will emit the light indi-
cation automatically according to the power in the system, and the indicator light has four states as below:
a. The first light sparkling, the electricity is low.
b. The first light on while the second light twinkling, the electricity is more than half.
c. The first and second light on while the third light shining, nearly full recharged.
d. All three lights on, the electricity is full.
• Press the power button
to LOW speed, then press again, it will change to HIGH speed. Each cycle like this way.
• If the product in the upright position, please pull the handle backward, so that the body support can leave
from the buckle and then it can start to work.
• In the status of power on, the brush and LED lighting will work together. Accordingly to the switching of
LOW-HIGH, the brush will rotate at a high speed and low speed, also, the LED lighting will change between
high and low light level. Push the handle back and forth to move the brush back and forth, twist the handle to
turn the brush left or right to reach every corner of the ground where you need to clean it.
• Press the release button to remove the main body (as below picture), you can use it for cleaning elsewhere,
such as countertops, sofas, seats and other surface cleaning.
• Press power button ON, the main body will star to be HIGH speed; And then press again, it will switch to
LOW speed; Finally, if press more again, it will change to power off.
ON, then press again, it will become OFF. When it is ON, press
THIRD LED
SECOND LED
FIRST LED
ON-OFF
LOW-HIGH
STEP 2
5
to switch
STEP 1