Aiwa SABERU 2500 Manual De Instrucciones página 9

BEFORE FIRST USE
Before first use, clean the various parts of the appliance.
ATTENTION
When the device is powered on, the start knob will flash with white. After the glass
cup is fixed, the red light will stop flashing and the knob will turn to" ON "to light up
white. (FIG A)
• The start knob allows you to use a variety of speeds from minimum power (min) to
maximum power (max).
• The start knob has 2 function buttons for your reference.
*Power off function: OFF
*Power on function: ON
FUNCTION BUTTONS
When you use the function button to process your food, you can turn the knob
"ON"and press the button as needed. (FIG B)
Working capacity is 1.5L.
USING THE GLASS JAR
Pour in the ingredients and cover the glass bowl（Fig. 1）, and then place the glass
bowl into the host（Fig. 2）, turn clockwise (Fig. 3).
Lift the glass bowl to check it is locking whether or not.
Plug in the appliance and rotate the start knob to which speed you need.
At the end of preparation, rotate the start knob to position "OFF", unplug the
appliance and wait until the blades come to a complete stop.
Remove the glass bowl and take off the lid, then pour out the ingredients.
BLENDING WITH FUNCTION BUTTON
Smoothie
When you use the smoothie button to process food, you need to turn the knob
clockwise to the position of "ON", the indicator light is red, and then press the
smoothie button, the machine will start the program and stop after running at full
speed for 60 seconds (the indicator light is always white when working, the indicator
light is always red when stopping work, and the red blinks when the cup is not placed
properly).
Ice & Crush
When you use the ice crush button to process food, you need to turn the knob
clockwise to the position "ON" where the indicator light is red, and then press the ice
crush button, the machine will start the program, open 3S to stop 4S, open 2S to stop
2S, open 3S to stop 3S, open 4S to stop 3S, open 5S to stop 3S, open 6S to stop 4S,
open 42, and the total time is 60S(the indicator light is always white when working,
the indicator light is always red when stopping work, and the red blinks when the
cup is not placed properly).
Veg&Fruit
When you use the vegetable and fruit button to process food, you need to turn the
knob clockwise to the position "ON" where the indicator light is red, and then press
the vegetable and fruit button, the machine will start the program, open 2S and stop
2S, open 4 cycles, continue to work for 40S and then stop, the total time of the whole
ENGLISH