Airzone Aidoo Pro Aerotermia AZAI6WSPPA2 Guía Rápida página 4

Aidoo Pro Control Wi-Fi by Airzone
FUNCTIONS
Aidoo Pro Air To Water is a solution for the remote control and integration of air to water
EN
units via Cloud services. This device makes it possible to manage the production, control the
temperature and program air to water units.
Aidoo Pro Air To Water communicates with the AC unit using the manufacturer's original
protocol. Therefore, the functions of each device may be different depending on the model. The
main functions of the Aidoo Pro Air To Water device are:
Unit control and error detection. The control options depend on the manufacturer's protocol
and how the unit is configured. The following parameters can be configured:
•
Status of up to two water circuits, if permitted by the manufacturer's unit.
•
Domestic hot water (DHW) status.
•
Operation mode.
•
Working settings.
•
Set-point temperature.
•
Room temperature reading.
Note: for further information on your Aidoo Pro Air To Water device, refer to the "Control
options" section.
Digital input (configurable from Airtools on Airzone Cloud). The digital input enables the
remote on/off control of the unit depending on the accessory used, which can be configured
as open window detection or as occupancy detection. By default, it will be disabled and
configured as "normally open".
Auto Mode (configurable from Airtools on Airzone Cloud). Auto mode enables the automatic
change of the operation mode.
Set-point temperature. Two set-point temperatures can be set.
Temperature limits (configurable from Airtools on Airzone Cloud). The maximum temperature
can be set in heating mode, and the minimum temperature in cooling mode.
Domestic hot water (DHW) production management. DHW production control enables the
on/off control of production, DHW tank temperature selection and the activation of the high
power function for faster production.
Time schedules. Status, temperature, mode and speed scheduling.
Cloud integration.
Integration ports. The device features RS-485 standard integration through Modbus RTU and
BACnet MS/TP.
Integration services. The device features Local API and Cloud API integration, Modbus TCP/IP,
Bacnet IP, voice assistants, drivers and mDNS multicast.
4