Publicidad
Idiomas disponibles
Idiomas disponibles
Mounting the brackets on the TV set
TV set with fl at rear wall (Fig. 4)
First, fi nd the screws suitable for mounting the TV set (C/D/E): try to screw them manually in the holes at
the back of the TV set. If you feel resistance stop screwing in immediately! Once you fi nd the screw with
correct threat, proceed according to the drawing 4. If you use the screw C or D, insert on it the corresponding
washer (F) and then screw the screw in the bracket B and fi nally, in the TV set. Check that the brackets are
attached vertically and are parallel.
Attaching the TV to the bracket and securing with safety bolts
Warning: Handling some TV sets requires help of another person. The manufacturer is not liable for injury or
damage to property caused by improper handling!
First, hook the brackets attached to the TV set (B) to the top edge of the body of the holder A, then push the
bottom part of the brackets to the bottom of the body of the holder. (Fig. 5). Then, using Phillips screwdriver,
tighten the locking bolts 1 (Fig. 6).
Congratulation, the installation is done. We wish you a pleasant experience while watching TV mounted on
the wall mount.
INSTRUCTIONS AND INFORMATION REGARDING THE DISPOSAL OF USED PACKAGING
Take the used packaging material to the municipal waste disposal.
PRODUCT DISPOSAL AFTER END OF LIFE
Dispose of equipment after the end of life in the designated municipal solid waste place
This product meets all the basic requirements of EU directives that apply to it.
13 – EN
Fast SHO B301.indb 13
29.3.2016 17:03:52
Publicidad
