Publicidad
Idiomas disponibles
Idiomas disponibles
GROUNDING
Improperly connecting the ground-
WARNING
ing wire can result in the risk of
electric shock. Check with a qualified electrician
if you are in doubt as to whether the outlet is
properly grounded. Do not modify the plug pro-
vided with the bench. Never remove the ground-
ing prong from the plug. Do not use the bench if
the cord or plug is damaged. If damaged, have it
repaired before use. If the plug will not fit the
outlet, have a proper outlet installed by a qualified
electrician.
Benches with Three Prong Plugs
Benches marked "Grounding Required" have a
power strip with a three wire cord and three prong
grounding plug. The plug must be connected to a
properly grounded outlet (See Figure A). If the
power strip should electrically malfunction or break
down, grounding provides a low resistance path to
carry electricity away from the user,
reducing the risk of electric shock.
The grounding prong in the plug is
connected through the green wire
inside the cord to the grounding sys-
tem in the power strip. The green wire in the cord
must be the only wire connected to the power strip's
grounding system and must never be attached to an
electrically "live" terminal.
Your power strip must be plugged into an appropriate
outlet, properly installed and grounded in accordance
with all codes and ordinances. The plug and outlet
should look like those in Figure A.
SPECIFICATIONS
Cat. No. ................................................ 48-22-8572
Two-Slide Drawer Capacity ............150 lbs. (68 kg)
Four-Slide Drawer Capacity .........300 lbs. (136 kg)
Total Capacity ...........................3500 lbs. (1587 kg)
AC Input Volts ....................................................120
Hertz ....................................................................60
Watts ...............................................................1875
Amps ...................................................................15
USB Output Volts...................................................5
USB Amps ..........................................................2.1
Recommended Ambient Operating
Temperature ...........5°F to 104°F (-15°C to 40°C)
FPO
Fig. A
15
14
13
1. Side handle
2. Power strip SDL-6N
3. Cord storage bracket
4. Grommet
5. Charger mounts
6. PACKOUT™
mounting attachments
7. Storage shelf
8. Swivel caster with
brake
3
SYMBOLOGY
Warning
Read Operator's Manual
Do not open more than one drawer at a
time. Bench may tip, causing injury.
Lock wheels when bench is not being
moved. Unlocked wheels can allow the
bench to move unexpectedly.
Do not use drawers as steps. Bench
may tip, causing injury.
Lock all drawers before moving the bench.
Do not step on side shelf. Shelf may
collapse or break. Bench may tip, causing
injury.
FUNCTIONAL DESCRIPTION
16
12
1
2
3
9
10
11
8
9. Cabinet corner
extrusion
10. Drawer slides
11. Rigid caster
12. Power tool holder
13. Power strip SDL-04C
14. Bumper
15. Bottle opener
16. Wood work surface
4
5
6
7
Publicidad
