LUMIT LEGRAND A20980309S Manual De Instrucciones página 9

INSTRUCTION MANUAL
LEGRAND
REF. A20980309S
Press ON, lamp turns on
Press OFF, lamp turns off
Press and hold TEST for 5 seconds to enter
the Test Mode, lamp keeps lighting on
with 100% brightness of current power
state for 10 minutes, then automatically
switch to the latest operation set before.
Press, lamp enters Sensor Mode as above.
- Neither lighting time nor brightness can
be adjusted under Sensor Mode.
- If press lighting time keys under Sensor
Mode, lamp will switch to Keeping Lighting
Mode.
Press, lamp enters default Keep Lighting
Mode as above.
Lighting Time
60% brightness
30% brightness
+15% brightness by each press
(Max 60% brightness)
-15% brightness by each press
(Min 15% brightness)
- Remove the insulating film from the control
before use.
- The control can only work after the luminaire is
turned on by pressing the button on it.
- Control distance: 6 meters.
- Each time you press a button on the remote
control, the lamp flashes once.
- When the brightness is adjusted to maximum
or minimum, the luminaire
will not blink.
- The ON/OFF button on the remote control has
a memory function.
Note:
These keys only work in permanent light mode.
The sealing order is irrelevant.
Ex.: If you press +
the light turns on at night at 45% brightness for
5h, after 5 minutes it switches to Sensor Mode.
+
[ EN ]
6