Publicidad
Idiomas disponibles
Idiomas disponibles
PIR-CAM-30
7. Specification.
Table 1. Technical parameters
Frequency bands*
Transmission range (outdoors)
Batteries
Battery life
Information about low battery level
Average power consumption
Maximum power consumption
Range of external power supply
Range of operational temperatures
Maximum humidity
Dimensions
Total weight
Environmental class according to EN50130-5
Security grade according to EN50131-1, EN50131-2-2
* National regulations may apply.
** Provided that the relevant requirements are complied with - see note under point 8.
8. How to install the detector.
Directly onto the wall using mounting tapes:
To flat wall
NOTE! For the Grade 2 requirements to be met, the detector:
must be mounted directly to the wall using the dowels and screws included in the package,
must be battery powered only (no connection external power supply).
Additionally, it is recommended to secure the cover with a screw - the designated opening is located in the place of the housing opening
(see Figure 1).
EBS Sp. z o. o.
ul. Bronisława Czecha 59, 04-555 Warsaw, POLAND
Technical support: phone +48 22 51 88 477, e-mail: support@ebssmart.com
www.ebssmart.com
AVA PRO Motion detector with camera
915 / 921MHz (ITU Regions 2 and 3)
PIR-CAM-30 can be installed in 3 ways:
In the wall corner
Using an articulated handle
868 MHz (ITU Region 1)
up to 1200 m
3x AA 1.5 V
up to 1 year
3,6 V
800 μA
1 A
from 7 V to 13.8 V DC
from -10 to +55°C
93±3%
60 x 100 x 46 mm
178 g
II
Grade 2**
Directly onto the wall using screws and dowels
(installation in accordance with Grade 2):
To flat wall
Way of installing the handle
to the wall/ceiling
Fig. 3. Detection range of the sensor.
In the wall corner
PIR-CAM30_manual_PL_EN_ES_PT_v1.5
v: 1.1.6
Publicidad
