Publicidad
Idiomas disponibles
Idiomas disponibles
3.3.
Device use
•
Place the fountain on a smooth, flat surface.
Connect the pump to the hose and place the pump at the bottom of the fountain.
•
•
Connect the LED fountain to the pump.
•
Fill the fountain with water and ensure that the pump is fully submerged.
Plug the power cord into an electrical outlet.
•
Never run the pump dry. There must always be sufficient clean water in the fountain to prevent the pump
from running dry. The pumping of flammable and other aggressive liquids is prohibited.
3.4.
Cleaning and maintenance
a)
Always unplug the device before cleaning or putting it away.
b)
Use only non-corrosive cleaners to clean the surface.
c)
After cleaning the device, all parts should be dried completely before using it again.
d)
Store the unit in a dry, cool place, free from moisture and direct exposure to sunlight.
e)
Clean the vents with a brush and compressed air.
f)
The device must be regularly inspected to check its technical efficiency and spot any damage.
g)
Use a soft, damp cloth for cleaning.
h)
Do not use sharp and/or metal objects for cleaning (e.g. a wire brush or a metal spatula) because they
may damage the surface material of the appliance.
i)
Do not clean the device with an acidic substance, agents of medical purposes, thinners, fuel, oils or
other chemical substances because it may damage the device.
DISPOSING OF USED DEVICES:
Do not dispose of this device in municipal waste systems. Hand it over to an electric and electrical device
recycling and collection point. Check the symbol on the product, instruction manual and packaging. The
plastics used to construct the device can be recycled in accordance with their markings. By choosing to
recycle you are making a significant contribution to the protection of our environment.
Contact local authorities for information on your local recycling facility.
EN
Publicidad
